They're beautiful, but- no one but you and I, the moderator, can see
the huge files you uploaded. The Photos section resizes everything
down to 300x400, that is all anyone else can see.
If I could get rid of the Photos section of the list, I would, but
there doesn't seem to be any provision for it.
This is why I prefer and recommend the Files section.
Steve
--- In
Homebrew_PCBs@yahoogroups.com, "Pedro Perez de Ayala Rull"
<payala@y...> wrote:
>
> Hi all, once again I'm a little bit late... I posted a message
some time
> ago, talking about my experience with toner transfer. I'll briefly
say that
> I have been doing 8mil wide traces with 8mil clearance boards with
very few
> problems using an HP 1010 laser printer, a DSC laminator and Time
magazine
> paper. Some people asked if I could upload some pictures; I have
added them
> to the photos section, in the directory called "TT 8mil" there is one
> picture of a test that I did wich I cannot tell exact traces width, but
> those two traces going between 0.1 mil spaced pads is pretty much
> self-explainatory. The other two pictures are form a part of a 5 by
6 inch
> board that I am working on, I only showed a part of the board to
show it in
> detail but the whole board had no errors, the only errors I have
right now
> is aligning both sides of the board and drilling accurately, as you
can see
> in the etched picture.
>
> Hope this helps someone, since I had to make many trials to achieve
> these results and would like this info to be useful.
>
> Thank you all for this wonderful group!!,
> Pedro
]