| previous by date | index | next by date |
| previous in topic | topic list | next in topic |
Hi Brad,
On the severely oxidized portion of the boards you can try two items, Straight, clear ammonia NH4OH or sudsy ammonia with several applications it should clean off the old board but may take several applications tro achieve your desired results.
One other item to try is "Tarn-X" available at Walgreens and CVS stores. This product is a thio-urea based cleaner and works wonders on PC boards based on personal experience. I'd avoid the sandpaper or emery cloth abrasive materials in favor of the liquid cleaner products.
When you get the copper mostly clean you could use "Brasso" to bring up a shine on the board, then wash with Dawn dishwashing detergent to remove any remaining oils followed by a clean water rinse and dryoff, before you proceed to the toner transfer process. This practice should get your board almost surgically clean which is what you need for a really successful transfer process.
Best of luck in your endeavors!
Allan, WA9IRS