On Wed, 29 Jun 2016 21:47:38 -0700, you wrote:
>Okay. So yeah.. it just doesnt work at all. Tried the laminator but the TRF wouldnt stick (probably the laminators fault.. not hot enough). So then I did extremely hard pressing with the iron for 10 full minutes. Dunked the thing in water.. but yeah. Nothing. If anything, the TRF is lifting toner from the board.
The laminator I use is a simple GBC creative laminator. It's probably
an old model. What you might want is a laminator with a foil setting.
You can try with a simple laser print to experiment with, running the
laser printed paper through the laminator. Dull side to the toner. I
have had occasional sheets where (for whatever reason) the foil
refuses to adhere at all. You simply let the foil cool naturally and
then peel it off. Oil or water is not your friend here.
I'd use small pieces and hold them on with tape.
If the laminator will do a piece of paper, then it's getting hot
enough for that foil. If not, then something is odd. Next step would
be the board, and that will take a while to get hot.
Harvey
>
>
>
>Kind of disappointed. Oh well. :) They do have white toner printers out now. $3000+ each though. :)