Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

Probably due to the unmodified laminator I used.  I had to run the board through 5 or 6 times to get good transfer to the board.  Even with rotating the board between passes, I usually had holes on end shifted over about a half pad or more. I also had to run the board through 3 times to preheat before applying the transfer pattern. Total time involved is about the same as when I used the laminator.  Also I had to use a genuine Brother cartridge, could not get good transfer with generic cartridges.  With the cold method I have not had any problems with either type.
DuWayne