"Roger Blair
Roger.Blair@... [Homebrew_PCBs]"
<
Homebrew_PCBs@yahoogroups.com> writes:
> Mathew,
> I see you are making good progress on your E260 project, and am very
> much interested in your Arduino controller effort. I just modified an
> E260dn, but working with Mark to cure a jam problem. I was looking for
> an Arduino solution initially, but hadn't found anything so when I
> discovered Mark's project I jumped right in. I would still like to have
> an Arduino as a replacement if necessary, or as an alternate for
> backup. I downloaded your github stuff, but with practically no
> programming experience, I can only follow along with you great folks
> "in-the-know"... Do you have some info on the Arduino hardware you would
> like to share?.
I don't have any special hardware. I built my arduino up just like his
attiny example. The only difference in my set up is i used a 10k
resistor instead of a 5k. If you need anymore help let me know. the
source labels all the pins where they correspond. I started getting
great results
https://imgur.com/5KJv3jT > Thanks,
> Roger
>