Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] Re: DLP MCU version troubleshooting

From: Roger Blair <Roger.Blair@...>
Date: 2015-04-04

Mark,
I have a 260dn, which hasn't  seen life yet after mod... You provided me with a pre-programmed board, which I haven't made connections to yet, as I'd hoped for some validation first, to avoid rework.

Thanks,
Roger

On 4/4/2015 6:43 AM, Mark Lerman mlerman@... [Homebrew_PCBs] wrote:
 

Roger,

That looks correct. Are you using an E260 or
E360? Are you still having the same problem that
the machine cycles correctly but it doesn't print?

Mark

At 12:00 AM 4/4/2015, you wrote:

>Hi Marc & Mark,
>I saw Marc's question marks on the same couple
>of wires I need some clarification on. I haven't
>seen any resolution yet, and wonder if these
>wires should be cut back to the connectors,
>left floating, or something else I am missing?
>Below is my hookup chart. Is there anything that
>is incorrect, or needs adding?


--
Dell XPS8700 256GB SSD 2TB HD 24.0 GB RAM Win8.1 64-bit Intel x64 8 Core(TM) i7-4770 CPU@3.40GHz 3.40 GHz