Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list  

Subject: Re: RE: [Homebrew_PCBs] Soldering a LQFP 48 o n a home made PCB

From: =?UTF-8?B?UmFmYcWCIE1yw7N6?= <poorchava@...>
Date: 2014-11-08

1000 grit wet sandpaper works too.

--
Wysłane z mojego telefonu za pomocą aplikacji myMail dla Androida.

sobota, 08 listopada 2014, 04:54PM +0100 od "'Boman33' boman33@... [Homebrew_PCBs]" <Homebrew_PCBs@yahoogroups.com>:

 
As so many others have suggested bare pads with lots of flux is the way to go.
I would in addition as a first step also brighten up the pads with “Scotch-Brite” scouring pad to remove any stubborn oxidations.
Bertho