Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
  topic list  

Subject: Re: [Homebrew_PCBs] Digest Number 4379

From: Mike <k4gmh@...>
Date: 2014-11-04

Hello Joe and Mark,

I was able to get the Lexmark E250 drivers to work with the Dell 1720.  Other than the Dell packaging, the insides are virtually Lexmark.  I've used both Dell and Lexmark drivers with the Dell 1720. 

At first, only the Lexmark driver would fully reproduce the PCB circuit artwork with the Dell 1720.  After downloading the Dell driver again, magic happened and the Dell driver works as well as the Lexmark. Have been able to configure the Dell 1720 with either Lexmark or Dell S/W.  

  Mike, K4GMH

On Tue, Nov 4, 2014 at 5:12 AM, <Homebrew_PCBs@yahoogroups.com> wrote:
There are 3 messages in this issue.

Topics in this digest:

1.1. Re: File - monthly.txt
    From:  epa_iii

2a. Re: Other printers for DLP
    From:  gsi11135
2b. Re: Other printers for DLP
    From: Mark Lerman


Messages
________________________________________________________________________
1.1. Re: File - monthly.txt
    Posted by:  palciatore@... epa_iii
    Date: Mon Nov 3, 2014 10:47 am ((PST))

Just a polite suggestion:

I suggest that you shorten/condense this message. I doubt that many will take the time to actually read it. It would be more effective if more did.



Messages in this topic (82)
________________________________________________________________________
________________________________________________________________________
2a. Re: Other printers for DLP
    Posted by:  gsi11135@... gsi11135
    Date: Mon Nov 3, 2014 2:15 pm ((PST))

/lurker mode off

 Any more info? Does the same printer configuration software work with Dell as the Lexmark? Have you published the code for the microcontroller used to 'fake' the printer?


 Thanks!


 Joseph
 /lurker mode on







Messages in this topic (15)
________________________________________________________________________
2b. Re: Other printers for DLP
    Posted by: "Mark Lerman" mlerman@... mark_from_pomona
    Date: Mon Nov 3, 2014 2:25 pm ((PST))


Not sure which printer you're referring to, but Mike successfully
converted a Dell 1720. The code is published in the Instructable,
but I can email it to you if you would like. I believe the
printer configuration software works with the Dell. If Mike is
around he can answer more fully.

Mark

At 05:15 PM 11/3/2014, you wrote:


/lurker mode off

Any more info? Does the same printer configuration software work
with Dell as the Lexmark? Have you published the code for the
microcontroller used to 'fake' the printer?

Thanks!

Joseph
/lurker mode on







Messages in this topic (15)



Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs

------------------------------------------------------------------------
Yahoo Groups Links

<∗> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Homebrew_PCBs/

<∗> Your email settings:
    Digest Email  | Traditional

<∗> To change settings online go to:
    http://groups.yahoo.com/group/Homebrew_PCBs/join
    (Yahoo! ID required)

<∗> To change settings via email:
    Homebrew_PCBs-normal@yahoogroups.com
    Homebrew_PCBs-fullfeatured@yahoogroups.com

<∗> To unsubscribe from this group, send an email to:
    Homebrew_PCBs-unsubscribe@yahoogroups.com

<∗> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/

------------------------------------------------------------------------