Roger,
You can probably make do with the 12". The advantage of the extra 2inches is that the trailing end of the Carrier will still be in therollers when the trailing end of a 6" long PCB is being printed. TheMCU you have now is actually calibrated for an 11" carrier, butworks okay for a 12 inch one. You could try it as is and see how it workfor you. Or, send it back and I'll reprogram it for either 12 or 14inches, your choice.
Mark
At 02:12 PM 9/4/2014, you wrote:
Mark,
Sorry for my slow response, too many things to do...
I expect to get the board in the mail within a day or two. I have trimmedthe board to .95 x 1.55"; I hope that won't affect your holdingmethod for programming. I'm about to review your latest Instructable; Iwill be updating my parts inventory, and since I had already cuttwo sheet pieces to 12", I presume I'll need to include anothersheet to meet the 14" callout .
Thanks,
Roger
On 9/4/2014 5:47 AM, Mark Lermanmlerman@...[Homebrew_PCBs] wrote:
Roger,
Did you get my email re reprogramming the board?
Mark
--
Dell XPS8700 256GB SSD 2TB HD 24.0 GB RAM Win8.1 64-bit Intel x64 8Core(TM) i7-4770 CPU@3.40GHz 3.40GHz