On 20. 08. 2014 15:11, Mark Lerman
mlerman@... [Homebrew_PCBs]
wrote:
> You can use anything you want as a carrier, but the top surface of
> the PCB MUST be grounded while the print is being made. If you use a
> non-conductive carrier you can use copper foil tape and a grounding
> clip that disconnects before reaching the drum. Metal seems easier to
> me, but ...?
>
> The drum does not seem to be that fragile. I do lightly file the
> other three edges of the pcb.
>
> Mark
>
>
Ok If I use plastic carrier then I need to apply transfer roller (or
GND) voltage to the pcb with some brush...
will wait now to get the printer...
Slavko...