>
> And PLEASE draw/describe what you want to build, I'm still not sure
how to
> make it.
> (Or if you finish fast some photos would do ;-) )
>
See:
http://webpages.charter.net/pminmo/holder.pngThe sides are 3/16 pvc rods I bought from a hobby shop. The
plexiglass is 1/8" I made my verticle tank out of. The idea is by
laminating three pieces of plexiglas together with the center
narrower than the 2 outside pieces will create a groove to hold the
board in. The bottom piece is fixed. i.e glued to the rods, the top
piece has two holes bored into so it slides up and down the rods.
One side ot the plexiglass will be tapped so a nylon bolt can be hand
tightened to hold the top section down depending on size of the board.
Phil