Clark,
Which procedure are you talking about? If it is the ability to fuse toner to
powder coat, it should not matter what is under the powder coat as long as
it is not too thick to get through the laminator.
Rick
-----Original Message-----
From:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com]
On Behalf Of Misc Clark
Sent: Thursday, August 22, 2013 10:08 AM
To:
Homebrew_PCBs@yahoogroups.comSubject: Re: [Homebrew_PCBs] Easy Fast Laser Print DIY Circuit Boards -
Dave's toner-transfer freezing technique
Hi all - fascinating discussion (I've been lurking for quite awhile)...my
interest is in photoetching shim brass.005 - .010 typically... any
reason(s) this toner transfer won't work for this application? I hope not!
:)
Clark Cone
On Fri, Aug 16, 2013 at 3:49 PM, Rick Sparber <rgsparber@...> wrote:
> ∗∗
>
>
> Fernando,
>
> There is no single answer here. Sure, CNC could be used to make boards.
> Most people send their artwork to China and get boards back in the mail.
> Equally valid.
>
> My goal is to find ways to do it with commonly found materials and
> machines. At the present time it looks like I can do it with parchment
> paper, a laser printer, a laminating machine, a kitchen freezer, and a
> few chemicals for etching. That's just part of my hobby and is not
> necessarily the "best" way to do the job. Ultimately, I want to etch a
> cylinder which would be rather tricky with a 3 axis CNC.
>
> Rick
>
>
> -----Original Message-----
> From: Homebrew_PCBs@yahoogroups.com
> [mailto:Homebrew_PCBs@yahoogroups.com]
> On Behalf Of Fernando Cassia
> Sent: Friday, August 16, 2013 12:39 PM
> To: Homebrew_PCBs@yahoogroups.com
> Subject: Re: [Homebrew_PCBs] Easy Fast Laser Print DIY Circuit Boards
> - Dave's toner-transfer freezing technique
>
> On Sat, Jul 27, 2013 at 11:59 PM, Robin Whittle <rw@...> wrote:
>
> > I added some distinctive text to this subject line so your message
> > would be easier to find in the archives.
> >
>
> I've been following all the discussions in this list, just as a
> lurker, and have to wonder if perhaps just buying a CNC machine is the
> answer? See
>
> http://hackaday.com/2013/08/16/101459/
>
> FC
> --
> During times of Universal Deceit, telling the truth becomes a
> revolutionary act Durante épocas de Engaño Universal, decir la verdad
> se convierte en un Acto Revolucionario
> - George Orwell
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links