On Wed, 14 Aug 2013 13:07:06 -0700, you wrote:
>Lee,
>
>Thanks for the offer. I would certainly like to try the material out.
>
>I've had excellent results from the wax paper from China when used with my
>laminator. But now I want to transfer the toner to the perimeter of a piece
>of copper pipe and the rules are different. Can't use the heat plus even
>pressure of the laminator on the pipe. Really don't want to make a custom
>machine either.
>
>I tried my heat gun and rolling the copper over the toner. Just smeared. Got
>any suggestions?
Tape the artwork to the copper, with something to keep it from
twisting (tape on outsides?)
Heat and roll against pressure.
Let cool.
May work.
Harvey
>
>Rick
>
>-----Original Message-----
>From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
>On Behalf Of studleylee
>Sent: Wednesday, August 14, 2013 10:59 AM
>To: Homebrew_PCBs@yahoogroups.com
>Subject: [Homebrew_PCBs] Re: Easy Fast Laser Print DIY Circuit Boards -
>Dave's toner-transfer freezing technique
>
>Hey Rick, (this is Lee Studley ),
>I bought a full roll of this stuff if you would like to play with some. I
>haven't tried it yet but it got good press for PCB's
>
>http://www.uscutter.com/ORACAL-651-Intermediate-Cal-Vinyl-24-x-10-Yard-Roll
>
>--- In Homebrew_PCBs@yahoogroups.com, "Rick Sparber" <rgsparber@...> w
>