If this helps
I just ordered a pure tin bar from mcmaster carr industrial supply.
Also I saw no comments on my previous post on this issue with the digikey
link
Now is this totally different then what the link specified???
because that part# was for a silvering kit/powder according to the
instructions you just dampen the corner of a cloth with water then touch the
powder ,then rub the pcb traces with the cloth , and you now have a silver
plating or??? on the board
as far as I know it does the same thing as tinning but no harsh chemicals .
I have not tried it I have spoken to the supplier (Dynnarart) and he has
explained it to me.
so next time I need to order from digikey or dynaart I will get some.
the cost is $30.00 but from what I can see it will last a long time.
regards
victor
----- Original Message -----
From: "Adam Seychell" <adam_seychell@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Saturday, November 15, 2003 6:09 PM
Subject: Re: [Homebrew_PCBs] Re: Tin eletroplating
>
>
> Stefan Trethan wrote:
> >
> >
> > other german supplier lists stannous sulfate at 15eur / kg. these prices
> > are pretty close to where i buy, most time my shop is a bit cheaper.
> >
> >
> > I know it is hard to get chemicals in small quantitys.
> > I'm glad to have this shop. It is the biggest shop of this kind in
Austria
> > and it happens
> > that it is in 5 minute walking distance from my University.
> > It has split off of a big chemicals supplyer for the industry here, and
it
> > is dedicated for very small quantitys. You can get everything in
whichever
> > tiny quantity you want.
> > You don't need to stick to packing units, they weigh how much you want
in
> > nice bottles or cans.
> >
> >
> > Another source for solid tin may be these awful plates and vases and
> > drinking vessels.
> > Most of them are ugly and i don't think they are expensive. One may just
> > melt the ugly stuff and cast anodes with it.. much easier than finding
> > ingots.
> >
>
> I've never seen pure solid tin as plates. Tin is soft so its
> not very good for making things. Try your local chemical
> company for tin metal, if not then plating suppliers or
> metal merchants. I got mine from a metal merchant. They had
> them in various ingots 0.5 to 2 kg. Look up metal suppliers
> in your local business directory. I found trying to find
> supplies is a matter of making enough phone calls and asking
> the right questions. Remember these people are in this line
> of business and would know a lot more than you of what's
> around and who is selling what and where.
>
> Adam.
>
>
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>