What do you suggest for user applied photoresist? PnP?
Rick
-----Original Message-----
From:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com]
On Behalf Of Boman33
Sent: Wednesday, March 20, 2013 6:41 PM
To:
Homebrew_PCBs@yahoogroups.comSubject: RE: [Homebrew_PCBs] Re: etching the OD of a cylinder to create a
graduated dial
If absolute best accuracy is wanted, coat the part with photoresist and
mount it on an accurate turntable. Set up an optical projector projecting
just one narrow line. Lock everything down and in a darkroom expose the
first line, change the turntable to the next line, expose and so on.
When done, the calibration accuracy is only limited by the turntable
accuracy, the centering of the part on the turntable and the roundness of
the part. The optical system never moved so it should be stable as long as
there are not any temperature gradients.
A second pass can be run projecting the numbers a required.
Bertho
[Non-text portions of this message have been removed]
------------------------------------
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links