The bottom line of this article is to turn the ferric chloride into a solid
and then just dump it. Any liquid removed can be poured down the drain.
I like the idea of mixing it with cement to stabilize the solid. One thing
the author said is that ferric chloride can't be rejuvenated. A while back
someone suggested it could by using steel wool. Didn't work for me.
Rick
-----Original Message-----
From:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com]
On Behalf Of leeleduc
Sent: Saturday, March 09, 2013 7:16 AM
To:
Homebrew_PCBs@yahoogroups.comSubject: [Homebrew_PCBs] Re: trying to do the right thing
The end of this article talks about disposal.
http://www.adafruit.com/blog/2009/01/25/the-chemistry-of-home-etched-pcbs/ --- In Homebrew_PCBs@yahoogroups.com, "Rick Sparber" <rgsparber@...> wrote:
>
> I have about 1/2 pint of used ferric chloride. I put it in a pint
> plastic containers and mixed in a lot of baking soda. It is now a thick
brown paste.
> Our city has a hazardous waste collection day but I figured this stuff
> might be trouble so called ahead. After a few hours, they called back
> and said no, they can't take it. So what else can I do to make it safe
> for disposal in the garbage?
>
>
>
> Thanks,
>
>
>
> Rick
>
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links