hi guys,
thanks for all reponses and links, it's very helpful to me.
i'll read all those links very carefully.
regards
hari
On 1/18/2013 10:14 PM, Mitch Davis wrote:
>
> On Fri, Jan 18, 2013 at 11:46 AM, Hari Hendaryanto hari.h@...
> <mailto:hari.h%40csmcom.com>> wrote:
> >
> > i need to make custom pcb layout.
>
> Hello Hari, welcome to the group.
>
> Here is the way I make PCBs at home. It works well and I can make
> PCBs in an hour:
>
> http://capnstech.blogspot.com/2011/05/playpause-making-pcbs-at-home.html
>
> > chemicals such as positive 20 or dry film are
> > hard to find here (not mention it's also expensive for hobbyist) :(. I
> > need enlightenment on how to make simple, good quality pcb, anyway, one
> > of my components is is TQFP chip, this is the hardest part...i've read
> > some pages, but still haven't got a clue.
>
> Regarding my method, the two special things you need are UV LEDs and
> presensitised blank PCB. Both are available on Ebay and don't cost
> much.
>
> Since this list allows the occasional commercial plug, I'd like to
> mention that I'm a supplier of professional (not home-made) PCBs for
> hobbyists. I can do 10 boards for USD19, including shipping
> worldwide. My advantage is that you can come and live chat with me
> and dozens of my customers 24 hours a day, about PCBs (including
> getting a review of your latest design), electronics, open source
> hardware, brewing beer, rocketry, high altitude ballooning, or
> anything technical that takes your fancy. Home-made boards is fine,
> and you don't have to be a customer, just come:
>
> http://webchat.freenode.net/?channels=hackvana
>
> My regards, and all the best with your project.
>
> Mitch.
>
>
[Non-text portions of this message have been removed]