On Fri, Jan 18, 2013 at 11:46 AM, Hari Hendaryanto <
hari.h@...> wrote:
>
> i need to make custom pcb layout.
Hello Hari, welcome to the group.
Here is the way I make PCBs at home. It works well and I can make
PCBs in an hour:
http://capnstech.blogspot.com/2011/05/playpause-making-pcbs-at-home.html > chemicals such as positive 20 or dry film are
> hard to find here (not mention it's also expensive for hobbyist) :(. I
> need enlightenment on how to make simple, good quality pcb, anyway, one
> of my components is is TQFP chip, this is the hardest part...i've read
> some pages, but still haven't got a clue.
Regarding my method, the two special things you need are UV LEDs and
presensitised blank PCB. Both are available on Ebay and don't cost
much.
Since this list allows the occasional commercial plug, I'd like to
mention that I'm a supplier of professional (not home-made) PCBs for
hobbyists. I can do 10 boards for USD19, including shipping
worldwide. My advantage is that you can come and live chat with me
and dozens of my customers 24 hours a day, about PCBs (including
getting a review of your latest design), electronics, open source
hardware, brewing beer, rocketry, high altitude ballooning, or
anything technical that takes your fancy. Home-made boards is fine,
and you don't have to be a customer, just come:
http://webchat.freenode.net/?channels=hackvanaMy regards, and all the best with your project.
Mitch.