Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: RE: [Homebrew_PCBs] Re: plating holes with an exploding wire

From: "Jeff Heiss" <jeff.heiss@...>
Date: 2012-12-08

That typically works fine. But with boards with more than two layers, vias
under chips, or BGAs with vias between ball pads, it does not work.



Jeff



_____

From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
On Behalf Of alan00463
Sent: Saturday, December 08, 2012 11:09 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: [Homebrew_PCBs] Re: plating holes with an exploding wire





How about just regular solid-conductor wire (Cu, Sn, etc.) ?
If it's the right diameter, it will fit into the holes.
Why wouldn't that work fine ?





[Non-text portions of this message have been removed]