Hi, Kevin.
That link worked OK for me. I'm not seeing how to attach one of those to the motor, though.
Donald.
--
∗Plain Text∗ email -- it's an accessibility issue
() no proprietary attachments; no html mail
/\ ascii ribbon campaign - <www.asciiribbon.org>
----- Original Message -----
> From: "Kevin Impson" <internetgiest@...>
> To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> Sent: Saturday, September 29, 2012 7:18:33 PM
> Subject: Re: [Homebrew_PCBs] Re: Want to attach motor to 1/8" COLLET
>
> Hi All,
>
> I don't know happened to Ebay but it wigs out with the link below....
>
> just do a search with Google for "straight shank collet chuck" you'll
> see a search result for Ebay about half way down, that will get you
> where you need to be...
>
> Also you can search for "straight shank collet chuck" directly on Ebay
> and get slightly different results.
>
> One seller seems pretty good, yes it's china, but look at the
> runout... seller name "ctctoolseller"
>
>
> Later....
>
> Kevin I.
>
>
>
> ________________________________
> From: Kevin Impson <internetgiest@...>
> To: "Homebrew_PCBs@yahoogroups.com" <Homebrew_PCBs@yahoogroups.com>
> Sent: Saturday, September 29, 2012 2:51 PM
> Subject: [Homebrew_PCBs] Re: Want to attach motor to 1/8" COLLET
>
>
>
> Hi psykhon,
>
> I did a little more refining on my search on Ebay try this one...
>
> http://www.ebay.com/sch/sis.html?_nkw=ER20-STRAIGHT-SHANK-COLLET-CHUCK-TOOL-HOLDER-ER-20-
>
> For a 1/8" collet you need the 4mm collet just to save you the time
> and hassle...
>
> Best Regards,
>
> Kevin I.
>
[snip]