The "designer" version (extra $50) of the software that comes with
the Sillhoute allows import of svg files. There is also an eagle ulp
that exports svg files, so there you go! Should work! There are also
numerous other software out there that can read bitmaps, pdfs, etc
and work with this cutter.
At 08:58 PM 9/12/2012, you wrote:
>AFAIK gcode is programming code for CAD/CAM software to routing
>holes in the drilling process
>
>Wondered if bundle software come with X/Y axis easy design , this
>is vector-graphics enabled
>rather than "bitmapped" (points instead of lines)
>
>At first glance it would be an asset if an average user shouldn't be
>involved with learning gcode
>programming if the cutter comes with a visual oriented interface
>
>So design can be transparent to the
>user even without knowing the intricacies of CAD/CAM software.
>
>Comments about Silhouette Studio software are welcome specially from
>those already using it.
>
>btw, I have seen only the so called CriCut that seems having similar
>concept to Silhouette Cameo.
>
>How they can be compared ?
>
>Are these paper cutters suitable for an average electronic
>hobbyist/diyer trying to do their own PCBs at home with only a
>cutter with X/Y blades and a Dremel flexible shaft ?
>
>
>TIA
>
>Samuel
>
>
>Re: More on - Produce Quick & Cheap PCBs with a CNC paper cutter
>Wed Sep 12, 2012 5:46 am (PDT) . Posted by:
>
>"Mark Lerman" mark_from_pomona
>
>I would guess that there's a lot of runout on this, which does limit
>the minimum trace width. One thing I might try when my Sillhoute
>comes in is to use a laser to remove paint resist. You should also
>use some sort of vacuum system to suck up the fiberglass dust.
>
>If the machine is mechanically adequate for pcb milling,
>
>the next step would be to convert it to use gcode like a standard cnc.
>
>
>This should be relatively easy for someone "skilled in the art".
>
>Mark
>
>At 06:11 AM 9/12/2012, you wrote:
> >I think he's using a flexible shaft extension like this:
> >
> >http://www.dremel. com/en-us/ attachments/ Pages/ProductDet
> ail.aspx? pid=225-01
> >
> >
> >
> >--- In Homebrew_PCBs@ yahoogroups. com, teknochaman <teknochaman@
> ...> wrote:
> > >
> > > Amazing idea using a Dremel.
> > >
> > > btw, does anybody know which is the pictured Dremel model ?
> > >
> > > That will help to understand works that can be done with it
> > >
> > > Mine is far thicker and heavier to be supported by a small cutter
> > >
> > >
> > > Hint or comments about the drilling part are highly appreciated.
> > >
> > >
> > > Best,
> > >
> > > Samuel
> > >
> > >
> > >
> > > ____________ _________ _________ _________ _________ ________
> > >
> > >
> > > Re: More on - Produce Quick & Cheap PCBs with a CNC paper cutter
> > >
> > > Mon Sep 10, 2012 7:48 am (PDT) . Posted by:
> > > "Mark Lerman" mark_from_pomona
> > >
> > > You've inspired me - I just ordered a Sillhoute Cameo!
> > >
> > > I have a few
> > > other ideas on how to use it and will post the results!
> > >
> > > Mark
> > >
> > > At 12:39 PM 9/8/2012, you wrote:
> > >
> > >
> > > >I'm back for a second round. This time I changed tacks - I have
> > > >turned the $270 CNC paper cutter into a 2.1D mill for mil-etching
> > > >PCBs - instead of the original drag-knife method. See video here
> > > >http://www.youtube. com/watch? v=rDRN1_i0vJU and some updated info
> > > >here http://research. microsoft. com/en-us/ projects/ papercutterpcbs/
> > > >
> > > >I haven't calibrated the setup yet like ipm, position tolerance and
> > > >repeatability and minimum isolation track width & repeatability but
> > > >that will come. The original method I was trying to perfect was to
> > > >drag a carbide knife through copper cladding to affect electrical
> > > >isolation but the swarf remaining was a problem.
> > > >
> > > >Mike
> > > ____________ _________ ___
> > >
> >
>
>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>