Markus,
I am in the process of building a copper plating
station for thru-hole plating. What you are describing
is very similar to the descriptions that I have read
about while researching this topic. Is there a website
with pictures and/or describing what you have done?
I am very interested in how you physically set your
plating station as the chemistry you are employing.
Best regards
Marvin Dickens
--- Markus Zingg <
m.zingg@...> wrote:
> Hi Adam
>
> >What small copper wires are you talking about ?
>
> Good question :) That's what someone told me they
> are used for. Well,
> I used the station during some runs without those
> bags and could not
> see a difference in the results. There are also no
> visible wires or
> such, so maybe they surf another purpose - hell,
> most likely the one
> you describe.
>
> I also use brigthner and the anodes also became this
> dark "patina"
> which I was told is good/important for the process.
> I do have the bags
> mounted and since I have them I never felt motivated
> to try without.
> Might be that I under estimate their effect. I must
> say though that I
> don't use air agitation in my tanks.
>
> Markus
=====
Registered Linux User No. 80253
If you use linux, get counted at:
http://www.linuxcounter.org__________________________________
Do you Yahoo!?
Exclusive Video Premiere - Britney Spears
http://launch.yahoo.com/promos/britneyspears/