OK people.
it's my turn!:-)
I tried the iron on.
bad to medium results, then I built a press with a temp controller just ok
results.
then I read about the laminator system !!!
I went to
http://www.dynaart.com/ and yes I did order ,and it's like night
and day.
excellent system. good price since I have had the system I have made about
20 boards all with 100% results .
some soic , but mostly single sided, fast and 100% results.
So to anyone who is wondering I highly recommend it.
OH, Frank at dynaart said that you should only have to run you board through
the laminator once but I do run it through twice I'M a chicken.
Regards
victor
----- Original Message -----
From: "wheedal99" <wheedal@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Monday, October 27, 2003 3:08 PM
Subject: [Homebrew_PCBs] Laser toner transfer - IT WORKS
> Really, the method works (with a laminator). I'm familliar with the
> photo-resist method and have the equipment and have used it in the
> past. I don't use photoresist now because toner transfer works great
> for me. Once you get it figured out it is actually faster. I can do
> everything I want with less expensive materials. I've done stuff
> quite a bit more complex than what I've published on the website; but
> I thought the given examples were sufficient to prove you can do
> pretty fine pitch work with the method. There still seem to be some
> critics out there. Thats fine; but don't discount something just
> because you haven't had as good of results yet.
>
> I've just done (last month) a 188 processor board with 2 100 pin
> tqfp's, 1 32pin tsop,1 40 pin pdip, 1 28 pin SOIC, 1 24 pin SOIC,
> several headers, leds, resistors, caps, SOT-223's. This one was
> tight and a bit of a headache, but more from drilling and soldering
> that many holes (>100). Thats mostly because I used a $39 harbor
> freight drill press.
> Maybe I'll have to post more pictures...
>
> Anyway, photoresist works. Toner transfer also works. Both take a
> little bit of experimentation to get workable results. My first
> photoresist boards weren't exposed/developed perfectly, just as my
> first toner tranfer boards weren't perfect either. A little patience
> and practice fixed that for me. I'm sure it could for you as well.
>
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>