I think the 0.032 pcb stock was two in a pack and 9-1/2 x 12 inches.
--- In Homebrew_PCBs@yahoogroups.com, "John" <jferrell13@...> wrote:
>
> If you feel up to it, I would like 2-orders. 4" X 6" is my favorite size. Actually whatever is shippable! a final target size of 3" x 5" is also a good size since my printer will do that size card. The .025 thickness should work well in the laminator.
> As I recall, I paid $20.00 for a 12" x 12" x 0.032"(1/2oz.) sheet from DigiKey. The laminator specs call for a max of 0.040" stock.
>
> If you choose to do this, make it easy on yourself! Gasolne is around $4 per gallon here. I don't want to take undue advantage of your generous offer..
>
> Should you care to contact me direct, jferrell13@...
>
>
> --- In Homebrew_PCBs@yahoogroups.com, "upnxwood16" <upnxwood16@> wrote:
> >
> > The board thickness is 0.025" with my calipers, so it is flexible and I can easily get 18 pieces that are 4x6" out of one sheet. It would be hand cut with my snips so I would try to make sure it is accurate as possible. I going to say that the weight of the copper is 1 oz. It etches perfectly.
> >
> > I could make a run for you to the store and cut it up into pieces. $16 total with shipping sound good if anyone is interested?
> >
> >
> >
> > --- In Homebrew_PCBs@yahoogroups.com, "D" <dl5012@> wrote:
> > >
> > > Hi Spencer,
> > >
> > > --- In Homebrew_PCBs@yahoogroups.com, Spencer W <upnxwood16@> wrote:
> > > > It's a surplus store in minnesota.
> > >
> > > Checked their website. They don't do retail sales on-line.
> > >
> > > Are you interested in buying, cutting down to size that can be shipped, and shipping to interested members? At say a 100-200% markup plus shipping?
> > >
> > > What is the thickness? Any idea what weight the cladding is?
> > >
> > > Regards,
> > > Dennis
> > >
> >
>