>
>
>
> I mean, imagine trying to solder this to a big pcb:
>
> www.delorie.com/electronics/bldc/transformer/img_2429.html
>
>
You would have less lead inductance and perhaps reduce EMI via
unintentional radiators if you did solder direct, but I understand the
motivation.
When it comes to EMI, everything's a dipole- whether desired or not.
http://www.hottconsultants.com/tips.html has a nice series "dipoles for
dummies". I found it a helpful reference.
Best regards,
Bill
> I did end up reworking it, though. The small windings for the control
> supplies (15v) needed another loop (they only have 8 loops) but at least
> they were on the outside (I figured those might need tweaking). I was
> able to make the changes without taking it off the little pcb.
>
>
>
[Non-text portions of this message have been removed]