Leon,
Actually the .DXF files are there but apparently internet system/browsers do
not like to transfer them with the DXF extension. If I change the extension
it copies the file.
Anyhow, as mentioned they are available as FTP.
Also all the way to the end are PDF files pre-formatted that can just be
printed.
Different printers often have serious problems with slightly angular lines.
If wanted, I can also email you the DXF file directly.
Happy testing,
Bertho
===============================
From: Leon Heller Sent: Sunday, February 12, 2012 10:23
On 12/02/2012 15:05, Boman33 wrote:
> Congratulation on a good result!
>
> Out of curiosity you might want to print the resolution target to see how
> the printer behaves with angular lines. See:
>
> http://www.vinland.com/USAF-1951.html
Thanks.
The .dxf files aren't available, and I can't do anything with the .dwg
files.
I don't have any problems with 45 degree tracks on my PCBs, down to 8/8 mil.
Leon
--
Leon Heller
[Non-text portions of this message have been removed]