Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] Re: Silver Ink

From: Mark Lerman <mlerman@...>
Date: 2012-01-18

The silver acetate seems to go for about $2 USD per gram from
"legitimate" sources, less from ebay. They mix 1 g with 2.5ml of
ammonium hydroxide plus .2ml formic acid. Assuming you can get 2 ml
of ink from the mixture and that the cost of the ammonium hydroxide
and formic acid are negligible (???), the cost would be about $1
USD/ml. Since you are only drawing traces, it shouldn't be too
expensive, especially if you can reuse any ink wasted in head
cleaning. Anyone interested in a group buy of the chemicals?

Mark


At 02:51 PM 1/18/2012, you wrote:
>Very Nice!!!! Thanks David et al for the sources!!! I think these
>traces could be further electro-plated if needed.
>-Lee Studley
>
>
>
>--- In Homebrew_PCBs@yahoogroups.com, David Mitchell <gossiphog@...> wrote:
> >
> > Look under the "supporting documentation" page:
> >
> > http://pubs.acs.org/doi/suppl/10.1021/ja209267c
> >
> > there is a PDF with the experimental methods described.
> >
> >
> http://pubs.acs.org/doi/suppl/10.1021/ja209267c/suppl_file/ja209267c_si_001.pdf
> >
> > good luck!
> >
> > regards
> > David
> >
> >
> >
> > On Wed, Jan 18, 2012 at 10:38 AM, MIKE DURKIN <Patriot121@...> wrote:
> > > There must be a reprint out there somewhere ...
> > >
> > > To: Homebrew_PCBs@yahoogroups.com
> > > From: mlerman@...
> > > Date: Wed, 18 Jan 2012 09:53:07 -0500
> > > Subject: [Homebrew_PCBs] Silver Ink
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Anyone interested in sharing the $35 USD cost of accessing the
> > >
> > > article Andrew found regarding silver acetate ink?
> > >
> > >
> > >
> > > Mark
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Be sure to visit the group home and check for new Links, Files,
> and Photos:
> > > http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
> > >
> > >
> > >
> >
>
>
>
>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>