<
http://www.panavise.com/index.html?pageID=1&page=full&--eqskudatarq=25> is the Panavise model 315 circuit board holder page. I loved this fixture with a standard base many years ago. Flexible, secure and surprisingly inexpensive for the functionality provided. (I used it to wire-wrap a large number of prototype computer boards back in the late 1970's and early 1980's.) Great tool. (Mine didn't have the quick-release; I just used the spring jaw to pop boards in and out.)
Regards,
Donald.
--
∗Plain Text∗ email -- it's an accessibility issue
() no proprietary attachments; no html mail
/\ ascii ribbon campaign - <www.asciiribbon.org>
----- Original Message -----
> From: "Boman33" <boman33@...>
> To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> Sent: Monday, December 26, 2011 9:06:24 AM
> Subject: RE: [Homebrew_PCBs] Re: PCB holder
> The design is OK if the only goal is to hold a stationary PCB.
>
> On a practical side it is usually desirable to be able to quickly
> alternate
> between top and bottom and this design is not good for that
> application. As
> someone already suggested, the Panawise "fork looking" rotating
> holders are
> very good.
>
> Of course use conductive jaws.
>
> Bertho
>
> =============================
>
>
>
> From: Kevin Impson Sent: Monday, December 26, 2011 06:00
> Hi Guys,
> Has anybody thought about maybe helping the original poster of this
> thread,
> by maybe suggestion to him to make the design he showed ESD safe?
> Or, I guess everybody can keep making analogies about the problem add
> not
> help him.
> I myself looked at the design with the UHWM and Nylon and see a simple
> fix
> and improvement that I'm going to prototype and then post for everyone
> in
> case in one wants to copy it.
> Best Regards,
> Kevin I.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>