Also:
I have other methods of cutting PCB material, including various power tools.
But cutting epoxy-glass material creates a lot of toxic dust, so I don't
do it that way.
One can learn to cut fairly accurately with the shears, and there is no
harmful dust.
BTW: The term "snips" and "shears" seem to be used interchangeable nowadays.
"Shears" will do the job.........."Snips" will not.
The "shears" with the red handles that I use are described in the Lowe's
image as "snips"
They are shears.
Roland F. Harriston, P.D.
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
Roland Harriston wrote:
> If you have a Lowe's Hardware nearby, you can get Wiss products there.
> Please note that there is a difference between "snips" and "shears"
> Snips will not do the job for you. I have both, so I speak from
> experience.
>
> Roland F. Harriston, P.D.
> ∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
>
> http://www.lowes.com/pd_105898-273-A9L_4294936478+4294962173_40_?productId=3348636&Ns=p_product_prd_lis_ord_nbr|0||p_product_quantity_sold|1&pl=1¤tURL=%2Fpl_Wiss_4294936478%2B4294962173_40_%3FNs%3Dp_product_prd_lis_ord_nbr%7C0%7C%7Cp_product_quantity_sold%7C1&facetInfo=Wiss
> <http://www.lowes.com/pd_105898-273-A9L_4294936478+4294962173_40_?productId=3348636&Ns=p_product_prd_lis_ord_nbr%7C0%7C%7Cp_product_quantity_sold%7C1&pl=1¤tURL=%2Fpl_Wiss_4294936478%2B4294962173_40_%3FNs%3Dp_product_prd_lis_ord_nbr%7C0%7C%7Cp_product_quantity_sold%7C1&facetInfo=Wiss>
>
>
> alan00463 wrote:
>>
>>
>>
>>
>> Thank you for all the ideas.
>>
>> I guess I ought to have mentioned that I also do not have access to
>> - a tile saw
>> - a band saw, or
>> - a drill press
>>
>> Too bad, a router bit on a drill press sounds like a neat trick. Or
>> better yet, a router in a router mounted in a router table. No,
>> unfortunately, I don't have access to a router either.
>>
>> Maybe I ought to just buy a pair of the Wiss 10" aviation shears. It
>> would be easier to operate since it doesn't need power, and doesn't
>> require me to purchase another cutting blade. Where would I go to get
>> such a tool? If you find a hosted picture of this tool, please post
>> it. Benjamin and Roland, thank you for your advice regarding this
>> tool. It ought to work, if I don't want to make any round edges on my
>> PCB. (I happened to be looking for switches in Radio Shack yesterday,
>> and saw a package of round PCB material. Yes, circular. Amazing.)
>>
>>
>
[Non-text portions of this message have been removed]