"jhalbrecht" <
jeffa@...> writes:
> That's pretty cool! With this modification can you make the transfer
> with one pass through the laminator?
For toner transfer, I still use 8 passes (rotate the pcb 90 degrees with
each pass). I suspect you need to bring the pcb itself up to
temperature also. For UV film I have to lower the temp to 240 but I can
do it in one pass.
> And if not I wonder if the feed speed could be regulated?
No, the motor is a fixed speed motor.
> Does making multiple passes through a laminator ever cause
> misalignment of the artwork and the copper? Slippage?
No, once it's stuck, it's stuck.
I suspect a multi-pass setup would want the TT paper to be smaller than
the pcb, though, so that the laminator grabs the big heavy part before
the light flimsy part ;-)