Tom,
What sort of material are you printing onto? It looks like velum in the
video. Is it dark enough as printed from the laser printer or are you
using an inkjet?
John
Automation Artisans Inc.
http://www.autoartisans.com/ELS/Ph. 1 250 544 4950
-----Original Message-----
From:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com]
On Behalf Of Tom Biery
Sent: Tuesday, October 11, 2011 6:54 AM
To:
Homebrew_PCBs@yahoogroups.comSubject: Re: [Homebrew_PCBs] The case for crowd-sourced PCB materials
Larry, I have been getting my presensitized PCB material from the company
Circuit Specialists I believe they are located in Arizona, there material
is fresh and is delivered in about one week. Their website is ....
http://www.circuitspecialists.com/Usually I get the 4.6" x 6.6" size double sided boards
http://www.circuitspecialists.com/gd114.html and then trim them down to
3.3"'4.6" to match the size that eagle software allows. Are you offereing
boards like that?
I use the UV exposure process and it seems to be working for me alright
here is a you tube video of... Making PCB for the FTDI Vinculum 2 Chip
http://youtu.be/qK6DKbzm024If you interested in my youtube videos please subscribe. If you are going
to make up a bunch of double sided positive photoresist boards I would
give some a try. Let me know. Tom
From: Larry Battraw <
lbattraw@... <mailto:lbattraw%40gmail.com> >
>To: homebrew_pcbs <Homebrew_PCBs@yahoogroups.com
><mailto:Homebrew_PCBs%40yahoogroups.com> >
>Sent: Tuesday, October 11, 2011 1:32 AM
>Subject: [Homebrew_PCBs] The case for crowd-sourced PCB materials
>
>
>
>Hi All,
>
>I've been lurking on this list for some time and seen a lot of different
>takes on making PCBs, whether it's toner-transfer, direct-print via
>last/inkjet, or UV-exposed resist (And a few stranger ideas). One thing I
>have noticed is that it is sometimes difficult or impossible to obtain
>the
>raw materials for our projects. In some cases (Dry film resists) it
>either
>takes forever (2 weeks to over a 3 months!) to get some from Hong Kong or
>the Czech Republic (via eBay), or you have to buy a lot at one time
>(Think'n
>Tinker 100-foot rolls for example, at $150+ w/mandatory express
>shipping).
>There are exceptions, but finding them and having any idea of how "fresh"
>the film is (Which is important to get reasonable results) is
>problematic.
>A couple years ago a company called Genesis MT sold a great product by
>the
>name of AQ-3000 water-based photoresist. It worked very well, was very
>reasonable for the amount you got for the price, and was available via
>eBay. Recently I found they had been acquired by another "professional
>services"-type company that requires large, company purchases of anything
>(i.e. ask for a quote, and no way to buy electronically). It is now
>impossible to get any of this great resist, the only water-based
>photoresist
>around. I don't consider the VOC-based resists as viable for use due to
>health concerns.
>
>What I propose is that we as a group of hobbyists provide our own
>materials,
>where some of us will volunteer to be a source for a particular material,
>in
>this case photo-imaging materials. I know there has been a lot of
>experimentation with direct/transfer tech but for repeatable,
>high-quality
>boards you really can't beat photoresist-based boards. I'm sure some
>people
>will differ with me but I've read too much about problems with board
>coatings, pre/post-heating, different inks (Sometimes very expensive),
>and
>the challenges modifying inkjet printers to be very interested,
>especially
>after I ruined a perfectly good printer trying it myself :-)
>
>Naturally I am volunteering for the dry film photoresist, since I have
>already placed an order which should be here in a couple days. I'd like
>to
>do the same for the Genesis AQ3000, although I have to find out the
>minimum
>order quantity (Apparently they make up a fresh batch for each order) and
>available payment methods. I'd like to think that we can use enough of
>the
>purchased products to have them avoid going bad (Shelf life for AQ3000 is
>6
>months, similar for dry-film). I would suggest charging actual cost plus
>a
>small surcharge to cover gas and time spent (Maybe $3.00 per order?). I
>want to make it possible for us to use high-quality products without a
>lot
>of delay or uncertainty/experimentation in regards to product quality.
>The
>cost would include cost of postage plus mailing materials (Padded
>envelope
>or plastic bottle+box for AQ3000). If it's popular enough, I could offer
>additional things like drill bits, PCB blanks, etc.
>
>I am certainly not adverse to having someone else take all the "business"
>from me, as the whole point of this exercise is to provide the materials
>at
>near-cost, quickly. However, since nobody else has suggested this (That I
>can remember) I figured I could at least start the process. I have to add
>some disclaimers here: I reserve the right to ship within 2-3 business
>days
>of a prepaid order, and if there are unusual restrictions on shipping
>items
>there (i.e. countries that have export regulations for the USA) I also
>will
>not even try to ship an order. Likewise, if I find out after the order
>has
>been placed it's going to be a lot of hassle to ship to I reserve the
>right
>to refuse/refund orders. Ditto for people who piss me off, sorry, I just
>won't work with people who can't be polite. If there are unusual
>circumstances like having a package refused and returned I also will
>charge
>a fee based on the time spent plus shipping/materials (Assuming the PCB
>materials can be re-used and are not damaged). And finally, I reserve the
>right to halt the service at any time, refunding any outstanding orders.
>
>This whole idea is an experiment in supply and demand and so I apologize
>for
>all the disclaimers. I don't want to be sued or even given a bad
>reputation
>because I had a package returned from Elbonia after being opened and
>damaged, and the person is upset.
>
>I apologize for the length of this email, but I'd like to gauge the
>interest
>levels (And potential orders) from people in the group and elsewhere.
>Please email me if you're interested, and what you would like to see
>offered. I would probably accept PayPal (Yes, they aren't wonderful but
>they're big and fairly reliable) for payment. Materials could either be
>ordered direct from me or I could post auctions on eBay, but I'm more
>interested in serving the community we have here rather than the entire
>world. I have a day job and this is just a way to benefit a group of
>like-minded people, so it can't be too much of a hassle or I will need to
>either put a stop to it or raise prices. It may be necessary to go the
>eBay
>route just to avoid having materials expire but I'd like to avoid it. Let
>me know!
>
>Kind regards-
>Larry Battraw
>
>[Non-text portions of this message have been removed]
>
>
>
>
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]