It is even more of a challenge when you have cats. I keep a can of compressed air and blow everything down before putting on the resist.
--- In Homebrew_PCBs@yahoogroups.com, Piers Goodhew <piers@...> wrote:
>
> Hi List,
>
> While I was ironing attempt #2 onto copper clad today, the outline of a human hair became clearly visible under the paper (the aluminium from the iron basically acted like a rubbing pencil). I guess the good news is that it was clearly apparent early on and I was not left to ponder over what it could be that caused the non-adhesion. But there certainly wasn't anything I could actually do about it.
>
> After a fruitless attempt to pull it out, I decided to just wash the paper off and see what the result was, whether I could patch a few traces. It was pretty significant! I've uploaded a photo at:
>
> http://groups.yahoo.com/group/Homebrew_PCBs/photos/album/809517956/pic/2133723863/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc
>
> Anyway, ∗another∗ thing to check carefully for before proceeding.
>
> PG
>