I would worry about this particular model. It says it has a non-stick coating, which would typically be Teflon. Teflon decomposes into toxic by-products at ~ 200C. The page here:
http://www.fluoridealert.org/pesticides/teflon.decomposition.prod.htm says:
“Overheating of PTFE generates fumes of highly toxic PFIB and poses a serious health hazard to the human respiratory tract. PFIB is approximately ten times as toxic as phosgene [2]. Inhalation of this gas can cause pulmonary edema, which can lead to death.”
I would not use this for reflow soldering, especially if it required bypassing or modifying the thermostat.
- Bob Headrick
On Fri, Sep 2, 2011 at 5:55 PM, Peter Harrison
<
peter.harrison@... <mailto:peter.harrison%40helicron.net> > wrote:
> Hi
>
> I was looking around a local store and came across a tabletop pizza oven:
>
> http://www.argos.co.uk/static/Product/partNumber/9331897/Trail/searchtext%3EPIZZA.htm
>
> They are reasonably cheap and should have room inside for about 6" diameter. Has anyone tried reflow with one of these? I guess that, so long as it can get up to about 240 deg C inside it stands a chance but I am not so sure it could get that hot. Certainly, I am not sure enough to try buying one just to see.
>
> It would be nice and compact though. Maybe replace the thermostat…
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>
------------------------------------
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
[Non-text portions of this message have been removed]
_____
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1392 / Virus Database: 1520/3872 - Release Date: 09/02/11
[Non-text portions of this message have been removed]