I'm making progress on the high temp. sleeving. I will update the list as and when.
PS A good Google search is "high temperature heat shrink sleeving"
D.
-----Original Message-----
From:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com] On Behalf Of Andrew Hakman
Sent: 29 March 2011 00:47
To:
Homebrew_PCBs@yahoogroups.comCc:
mlerman@...Subject: Re: [Homebrew_PCBs] High temperature sleeves for laminator rollers?
Pretty sure the heater is actually a large halogen lamp, that runs at line voltage (hence why there are 120V fusers, and 220V fusers).
Andrew
On Mon, Mar 28, 2011 at 5:35 PM, <mlerman@...> wrote:
>
>
> I'm sure it has been done. Just add a mechanical crank and a
> temperature controller using the built in thermistor and the built in
> heater (probably
> 24 VAC) and you're done.
>
> Mark
>
> -----Original Message-----
> >From: Erik Knise <elknise@...>
> >Sent: Mar 28, 2011 6:21 PM
> >To: Homebrew_PCBs@yahoogroups.com
> >Subject: Re: [Homebrew_PCBs] High temperature sleeves for laminator
> rollers?
> >
> >I've looked around only before but haven't seen anything. Also "high
> >temp laminator" doesn't return man useful search results.
> >
> >I know some people have tried to modify a laser printer to print
> >directly onto PCBs. What about making your own laminator built around
> >a fuser?
> >
> >--
> >Erik L. Knise
> >Seattle, WA
> >
> >On Sat, Mar 26, 2011 at 9:35 AM, David C. Partridge
> ><david.partridge@...> wrote:
> >> The technology for high temperature rollers exists as fusers run at
> temperatures above 200C, and in some cases at lot above that.
> >>
> >> The rollers on this laminator are 22mm dia, and the sleeves about
> >> 2mm
> thick.
> >>
> >> Does anyone know where to get new high temperature sleeves, and
> >> also how
> they are fitted?
> >>
> >> Thanks
> >> Dave
> >>
> >
> >
> >------------------------------------
> >
> >Be sure to visit the group home and check for new Links, Files, and
> Photos:
> >http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
> >
> >
> >
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links