NO!!!
Donald.
Reason - Toner is not water soluble.
--
∗Plain Text∗ email -- it's an accessibility issue
() no proprietary attachments; no html mail
/\ ascii ribbon campaign - <www.asciiribbon.org>
----- Original Message -----
> From: "Randy S." <rj3819@...>
> To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> Sent: Thursday, February 17, 2011 1:56:36 PM
> Subject: Re: [Homebrew_PCBs] Re: Toner not sticking to PCB well
>
> Can not soaking the board for long enough prior to rubbing it off with your thumb
> cause the toner to come off the board?
>
>
>
>
> ________________________________
> From: Jeff Heiss <jeff.heiss@...>
> To: Homebrew_PCBs@yahoogroups.com
> Sent: Thu, February 17, 2011 1:48:14 PM
> Subject: Re: [Homebrew_PCBs] Re: Toner not sticking to PCB well
>
>
> I used a modified GBC laminator. Check "Another GBC Laminator Mod" in
> the Photos area for pictures.
>
> On 2/17/2011 1:19 PM, Randy S. wrote:
> >
> > Which laminator do you use and if its not available .. have any
> > suggestions?
> >
[snip]