Dear Vincent,
Our Inkjet Workstations are based on Epson-Printers. So the Ink will work in Epson-Printheads.
We decided to sell he ink to People, who want to build (or have buildt) their own PCB Printers.
You cant youse this system with printers without modification. The reason is, that a primer is applied first, which reacts with the inks.
The pressure rollers of the printer would cause defefects in that primer - so the printer has to be modified
in such a way, that no rollers make contact to the thing onto which you want to print.
Thats the reason why we use jigs, into which the PCB (or frontpanel or whatever) is placed.
If you want to see a bit more information about the inks itself, please feel free to visit: www.tritron.eu ,
which is the manufacturer. There is an English section also, and a small Video which introduces the company.
The have a branch office in the United States also.
The managing director Dr. Simon -who is the inventor and holder of the patens of this ink- and me decided that it is the best way, that people who are interested in this ink for etchmasks, soldermasks etc first contact me, as Tritron and Dr. Simon didnt knew that their inks can be used in such a way - that was something, which I found out by myself.
Dr. Simon and I work very, very closely together since years, so I am much more than just a dealer.
So please have a look at that website, and feel free to aks again, if you have any questions. Unfortunatly my English isn`t too good, but I hope it good enough to read out the information you need.
Thanks for your Interest,
Ingo Schuldes
-----Ursprüngliche Nachricht-----
Von:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com] Im Auftrag von Vicent Colomar Prats
Gesendet: Samstag, 12. Februar 2011 19:36
An:
Homebrew_PCBs@yahoogroups.comBetreff: Re: [Homebrew_PCBs] Added some photos( specialprint-folder) of inkjet-etchmask boards down to 3mil
Hi. I've seen your webpage and, as I don't understand deutsche, it seems
those inks are for Workstation 1, 2 and 3. But are those inks compatible
with any comercial printer? What color did you use for the pcbs?
2011/2/12 Ingo <
Ingo.Schuldes@...>
>
>
> As some people might miss the inkjet-Group, I added some photos here.
> The etchmasks were printed by using thermal-curable inks which are
> manufactured by tritron.
>
> For people in Europe, the inks are available from us. People from the USA
> can get it from the branch office of tritron usa; but please contact us
> first if youre interested.
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links