Man, you're crazy!!!!
That might be awesome to have "toys" like that. Now I understand how
you are doing those "walls" ;)
I will send you pictures of mine when I will receive it in a week.
Thanks again,
JM
2010/10/19 freedom2000 <
freedom2000@...>:
> exactly for the egg :-)
>
> for the walls... I have designed a mill see here :
> http://www.usinages.com/ma-fraiseuse-v2-a-vos-critiques-svp-t8144-195.html
>
> so it's quite easy to produce the replacement walls from epoxy (pcb
> copper boards)
>
> An even faster solution that I have not yet tested would be to use a
> laser cutter see here :
> http://www.usinages.com/soft-pour-plp-c50-t22761.html
>
> and you will recognize that I am very close to be able to "lase" the GBC
> walls !!!
>
> JP
>
>
>
> Le 19/10/2010 22:13, Jean-Marc Spaggiari a écrit :
>>
>> > If you don't increase the temp you won't get good results as the temp
>> > will not be high enough to melt the toner... whatever the motor
>> speed is...
>>
>> I see. It's like if I try to cook an egg but putting it on 20C water.
>> I can let it there as long as I want, is will never harden...
>>
>> > If your "walls" are the same as mines I could probably mill the walls
>> > for you... I already did it 3 times ;-)
>>
>> Thanks A LOT for the offering. I will receive the laminator in about a
>> week. So I will let you know at that time. But I'm curious, how are
>> you going those "walls"?
>>
>> JM
>>
>>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>