The laminator is now in stock..... at $229!!!
--- In Homebrew_PCBs@yahoogroups.com, "sailingto" <sailingtoo@...> wrote:
>
>
> Thanks for info - I read those specs but missed the temperature line.... open my eyes!
>
> It's listed as unavailable now, and doesn't seem to have any idea when it will be available again. Darn it - I was about to order one today.
>
> Even if it only gets to 325ºF would do a toner transfer with HP P1006 toner. I nomrally do my transfers with a roller temp around 310-320ºF.
>
> Thanks again for info.
>
> Ken H>
>
>
> --- In Homebrew_PCBs@yahoogroups.com, "Richard" <rdheiliger@> wrote:
> >
> >
> >
> > The specs from the amazon page:
> > Power: 600W
> > LEDS: Red LED when preheating. Green LED when ready.
> > Voltage: 110-120V AC, 2.4A @ 60Hz
> > Speed: 2.5pp/min
> > Working Temperature Range: 77F (25C) - 390.2F (200?C) (adjustable)
>