James,
I guess I have no problem with that. The information is a bit dated in that the conversion can be done much more simply - see the posts by "Jim" - but my original work was designed to be a proof of concept. It morphed into a step by step, but I suspect the E260, though very good for DLP, is not the best printer to convert. I hope to revisit the project in a few months when I have more time.
Mark
-----Original Message-----
>From: jamesmichaelnewton <jamesmichaelnewton@...>
>Sent: Sep 10, 2010 12:35 PM
>To: Homebrew_PCBs@yahoogroups.com
>Subject: [Homebrew_PCBs] Re: DLP DS Update
>
>Mark, would you be willing to allow me to convert that PDF to HTML and post it on the site at massmind?
>
>PDF's are nice, but they are dead... meaning that they can't be updated with questions, comments, new information from others. The massmind wiki supports living documents which are updated as time goes by and to which others add their experience.
>
>All credit to you for the documentation of course.
>
>--
>James.
>
>
>
>--- In Homebrew_PCBs@yahoogroups.com, Mark Lerman <mlerman@...> wrote:
>>
>> It's in the files section of this Yahoo Group - Mark
>>
>> At 01:22 PM 9/9/2010, you wrote:
>> >Hi Ken and Mark,
>> >
>> >When Ken says Mark did a fantastic job of documenting, is that a
>> >reference to the many photographs on the pbase site, or is there
>> >another set of documentation that I missed?
>> >
>> >I'm starting a page on DLP on the massmind site:
>> >http://techref.massmind.org/techref/pcb/etch/directlaserprint.htm
>> >and I've linked to Marks pbase pictures, but I would love to link to
>> >something more if it exists...
>> >
>> >--
>> >James.
>> >
>
>
>
>
>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>