I use 30ga wire wrap wire. I bend it over on both side. They don't fall out.
There are easy ways to me HB PCBs and there are HARD ways to me HB PCBs!
Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"
----- Original Message -----
From: "Alessio Sangalli" <alesan@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Wednesday, August 18, 2010 9:29 AM
Subject: Re: [Homebrew_PCBs] Re: Copper Foil Vias, Correct URL
> On 08/18/2010 08:23 AM, Bob Macklin wrote:
>> What's wrong with simply sticking a wire through the hole and soldering
>> on
>> both sides?
>
> It is very easy for that wire to "come out" while you are soldering
> it... the hole must be made small enough so there is some mechanical
> resistance for the wire to move, according to my experience.
>
> bye!
> as
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>