--- On Wed, 11/8/10, Stefan Trethan <
stefan_trethan@...> wrote:
> From: Stefan Trethan <stefan_trethan@...>
> Subject: Re: [Homebrew_PCBs] removing toner?
> To: Homebrew_PCBs@yahoogroups.com
> Date: Wednesday, 11 August, 2010, 16:47
> Because it takes less seconds to
> scrape it off mechanically.
> It is very brittle and comes off easily.
Ah, I think I can see the reason for the different methods! When
I do toner transfer with an HP LaserJet 4+, the toner is not
brittle at all, and does not come off easily. I use acetone
(sold in the UK as finger-nail polish remover) and a rag, but
I have to rub quite hard, and it takes some time.
Different toners seem to require different solvents and techniques.
--
John Honniball