Acetone and Lacquer Thinner work equally well. I use a paper towel wetted
with either one.
Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"
----- Original Message -----
From: "Alessio Sangalli" <alesan@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Wednesday, August 11, 2010 8:43 AM
Subject: Re: [Homebrew_PCBs] removing toner?
> On 08/10/2010 11:35 PM, Eddie Stassen wrote:
>> Lacquer thinners works way better than acetone
>
> I had to look for your answer in the mail you sent, but when I found it,
> I must ask, how can it be better than acetone?
>
> Acetone works so well, you make a shop cloth wet with it, yuo pass it
> ONE TIME and the copper is shiny clean. Heavy duty flux cleaner works as
> well.
>
> For who removes it "mechanically": come on, how can you risk to damage
> small traces on your board, and put several minutes of effort when there
> is a simple alternative like passing a cloth ONE TIME on each side of
> the PCB?
>
> bye
> as
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>