On Mon, 19 Jul 2010 12:02:48 -0000, you wrote:
>Is anyone routinely making their own 4-layer PCBs. Charles AE5EW
No. The best way I have heard to do this is to overdrill the blind
vias on the top and bottom layers, then wire jumper to the inner
layers. Standard vias do not connect the two middle layers, or to the
two middle layers, but only top to bottom. This avoids the plated
through holes.
I have yet to design and implement a board like this, though. Still
theory.
Harvey
>
>--- In Homebrew_PCBs@yahoogroups.com, "ae5ew" <ae5ew.us@...> wrote:
>>
>> Ok. I admit I'm ignorant when it comes to this subject. How is an IC lead connected to say layer 8 on a 16 layer PCB. I'm only using this as an example. The same thing with connecting to layer 2 of a four layer PCB. The top and bottom layers are straight forward. A 16 layer board is built one layer at a time (etching)? I have never worked with anythng other than 2 layer PCBs as far as installing/removing components. Modern computers use multilayer PCBs. Any guidance would be appreciated. TIA Charles AE5EW
>>
>
>
>
>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>