Hi
For printing-etching take a look to a method we use for prototypes
at:
http://www.geocities.com/pdmtrRegards
Sotris Pdmtr
http://www.aspisys.comASPiSYS Ltd.
P.O.Box 14386
Athens 11510
GREECE
Tel : +30 210 7719 544
Fax : +30 210 7714 983
--- In
Homebrew_PCBs@yahoogroups.com, "tamerlane221"
<T_dragger44@f...> wrote:
> Homebrewers...
>
> I've been subsribed to the group and reading posts for several
> months now with the goal of learning enough to be able to fab a few
> simple boards. Unfortunately, it's not happening through "osmosis"
so
> I wonder if you guys could recommend a book or two that I could buy
> that would cover the basics. A lot of you clearly know what you're
> doing but the discussions about the nuances of using printers and
> playing with various chemical etchings is above my head right now
so I
> figure I'd better find something that covers the basics. Any help
> would be appreciated.
>
> Finally, one of the near term goals is to fabricate a couple of
small
> boards for carrying some LEDs and a few amplifiers and regulators,
> (nothing real complex from a circuit standpoint). Does anyone here
> offer a service to make boards like this? I would be interested in
> talking with someone who could provide a fee service for a little
> assistance with the board design and then actually make a few
prototypes.
>
> Thanks
> Monte