twb8899 wrote:
>
> The easiest tanks to fabricate were those made from PVC since it can
> be welded using a hot air welder.
> When welding PE and PP I always use nitrogen as the welding gas.
I was strongly advised towards PVC because the easier welding. I am
reconsidering PE because the price only. And since it as superior specs
for the application...
According to your description I may probably end with solder burns or
poor joint by welding PE with an hot air welder?
My little experience was a few ABS and PP repairs in vehicle plastics,
never with PVC or PE.
Thanks,
Simao