sailingto wrote:
> Phil, I have used rivets very similar to those in the .8mm size. The
> tool I have is a Panapress with the punches - they work nice indeed.
> High density would be a problem. My use is normally for via from one
> side of board to other and my boards are NOT dense.
I take it you mean something more like this?
http://www.megauk.com/through_hole_rivets.phpThe drill sizes seem a little more reasonable (0.8mm rivet needs 1.0mm
hole, and there's a 0.4->0.6mm rivet for finer pitch work), as do the
prices (about £25 for a pack of a thousand rivets, about 1/10th of the
price of the CIF parts). Problem is the tooling is much more
expensive... £250 for the press, then £91 for each die set (one required
for each size). Ugh.
Think I'll stick with wire-wrap wire, the 0.5mm drill bit and a needle
file for now...
--
Phil.
ygroups@...http://www.philpem.me.uk/