That was one of the BIG reasons I purchased a L/C meter IIB by AADE (Almost All Digital Electronics) was to check SMD chips. Problem is, it just doesn't do SMD caps very well - does leaded caps just fine, but SMD... not so good.
I have talked to the guy who say "Send it back for calibration", I've got to get that done.
Thanks for all the info - sounds like there is no real reason other than "they don't do it".
Ken H>
> If you're going to deal with capacitors and resistors, at the least,
> you need a pair of tweezers that connect to your DMM.
>
> Better would be a self contained meter. They range from moderately
> expensive (with less features) to very expensive (with lots of
> features).
>
> Harvey
>