Archive of the former Yahoo!Groups mailing list: Homebrew PCBs
Subject: Re: [Homebrew_PCBs] Finally! A good toner transfer. On to etch.
From: DJ Delorie <dj@...>
Date: 2010-02-15
You could try what I do for UV film - tape the leading edge of the TRF
to a piece of paper (carrier), so the paper holds the front edge flat
and you can hold the back edge, feeding the pcb between the TRF and
the paper. If you pull the two leading corners apart when you tape
them, or tape the whole leading edge, that should prevent wrinkles.