Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: RE: [Homebrew_PCBs] Re: Reducing concentration of HCl from 10% to 40%

From: "Roger Blair" <Roger.Blair@...>
Date: 2010-01-19

Stefan,

Yes, there is. Finally after half a dozen different places that only sell 10% HCl, or muriatic acid "replacement", today I finally
found a bona fide single purpose pool supply establishment that still carried 2 gallon packs of 32% (Muriatic Acid) HCl for $11,
same price as the 10% stuff. Several Chemical supply outlets I tried would not sell hazmat to individuals, or wanted $25 or more for
hazmat shipping charges on top of up to $138 for 37% stuff. I'm going to try the 32% HCl.

Thanks everyone for the help,

Roger





From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] On Behalf Of Stefan Trethan
Sent: Tuesday, January 19, 2010 10:29 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: Re: [Homebrew_PCBs] Re: Reducing concentration of HCl from 10% to 40%





I'm absolutely positive there's HCl to be bought in California
somewhere. It's just a matter of finding the source.

ST

On Tue, Jan 19, 2010 at 5:52 PM, Lee Studley <indigo_red@... <mailto:indigo_red%40qwest.net> > wrote:
>
> Unfortunately, in California breathing air is considered a carcinogen.
>
>> 30~35% (wt) HCl is readily available as brick cleaner/ pool acidfier
>> here in Australia. Even sold in 250ml bottles up to 20L drum at some
>> local hardware stores. Its possible to remove some of the water, but not
>> practical. Normally, dry HCl is produced in an oven and then dissolved
>> in water until saturation, of which you get about 35% acid at STP.
>>
>> Adam
>
>
>





[Non-text portions of this message have been removed]