I am also making one. You can see the details at ....
http://homepage.ntlworld.com/moonshadow/New_Folder/engraving1.htmAt the end you will find lots of links to other related sites.
John.
----- Original Message -----
From: starsnstripes_2003
To: Homebrew_PCBs@yahoogroups.com
Sent: Sunday, July 27, 2003 2:54 AM
Subject: [Homebrew_PCBs] Milling m/c bug
Ok, all this talk has given me the bug to build a milling machine
for pc boards. Something that will be semi-precision.
Maybe some of you guys can offer some good tips for building an X/Y
table?
I am a poor person and want to hold cost down as much as possible,
so ideas like the "Drawer Slide" linear motion bearings are greatly
appreciated!
Slides:
I'm not sure how much play are in those drawer bearings. Probably a
lot. I'll have to look for some good ones, or maybe make my own
slides from brass or UHMW channels. I've dealt with different types
of gibs and round shaft/ball bushings before, so can probably figure
out something that is semi-precision at low-cost.
Linear Motion drives:
Stepper motors are the obvious low-cost solution, but I'll need to
find some good resources for cheap parts that will work properly as
a complete system.
True servos? Better but not as available as "surplus" ?
Either one would of course need suitable controllers and software.
I can write some software (VB and Perl) but I think some
shareware/freeware is available to handle conversion from different
CAD programs...
Then I'll need to fabricate the mechanical drive portions: Leadscrew
or Timing Belt like printers?
Design parameters:
What are the largest boards I should allow for in the x and y axis
travel? 8", 12"?
Anyone who has experience with such things, please chime in if you
know of some good sources for info or parts!
Yahoo! Groups Sponsor
ADVERTISEMENT
Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs
To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]